Anti-falling net manufacturer: What is the difference between anti-throwing nets and anti-falling nets?

　　On roads or bridges, anti-throwing nets and anti-falling nets are used to prevent debris and stones from vehicles from causing harm to pedestrians and vehicles passing under the bridge.

　　 I. What are the different scenarios for using anti-throwing nets and anti-falling nets?

　　Bridge anti-throwing nets are made from high-quality low-carbon steel wire through a series of processes such as drawing, weaving, welding, and plastic dipping. They are widely used for guardrail protection on municipal elevated bridges, highway overpasses, railway overpasses, interchanges, port terminals, livestock farming, planting, etc.

　　Anti-falling nets are woven and welded from low-carbon steel wire and aluminum-magnesium alloy wire, mainly used for protecting and guarding both sides of bridges. They are primarily used for protection and safeguarding on both sides of bridges. They can also be used as isolation fences for highways, railways, airports, industrial parks, agricultural development zones, and demonstration projects.

　　Based on the above definitions, we found that both anti-throwing nets and anti-falling nets can be used for protection on both sides of roads and bridges, usually installed in places like highways, railways, and overpasses, so there is not much difference in their usage.

　　 II. What is the difference in function between anti-throwing nets and anti-falling nets?

　　People on the road know that when driving, some pebbles and debris will splash around with the high-speed rotating wheels. These pebbles and debris will not have much impact on a flat road, but it's different on a bridge. If some physical protection is not set up, these pebbles and debris will fall onto the bridge. Imagine what kind of harm it would cause if pedestrians or vehicles passed under the bridge? Isn't it terrifying? Anti-throwing nets and anti-falling nets are designed to prevent small stones and debris from falling. Both anti-throwing nets and anti-falling nets are guardians on highway bridges and are essential equipment; their functions also do not differ much.

　　 III. Advantages of anti-throwing nets and anti-falling nets

　　1. The net body is lightweight, novel in design, beautiful, and durable.

　　2. Especially suitable for bridges.

　　3. Efficient plastic dipping, good rust prevention performance.

　　4. The product can be easily disassembled and reused, and can be adjusted when the layout needs to be changed.

　　5. Environmentally friendly product, recyclable after use.

　　6. Beautiful and generous, easy to maintain, bright in color, it is the preferred product for beautifying highway environmental engineering. The anti-falling net can ensure the continuity and horizontal visibility of anti-glare facilities, and also isolate the upper and lower lanes, achieving the purpose of anti-glare and isolation. The anti-glare net is economical, beautiful in appearance, and has low wind resistance. After galvanizing and plastic coating, the service life can be extended and maintenance costs reduced. It is easy to install, not easily damaged, has a small contact surface, is not easy to get dusty, and can be kept clean for a long time.

　　In bridge and highway engineering, anti-throwing nets and anti-falling nets are widely used, mainly due to their good quality, low cost, and convenient construction. However, from the descriptions above, there is actually not much difference between the two.

E-mail :

info@xhwiremeshs.com

Phone/WhatsApp/WeChat：

+86 15333189993

Address：

No. 12, Jing Si Road, East Industrial Park, Anping County, Hengshui City, Hebei Province