Chain Link Fence Height and Security Guidelines
Oct 10,2026
Chain link fences typically stand 6 to 12 feet tall, and 8 feet suits most commercial sites. The right height depends on risk level, zoning rules, structural capacity, and site conditions. Height alone does not deliver security. Property owners must pair it with correct wire gauge, post spacing, and toppers. A strong Security Fence System How to Choose the Right Security Fence System for Industrial and Commercial P protects perimeter fences effectively.
Key Takeaways
- Choose fence height based on your property's risk level: 6 feet for low-risk sites, 8 feet for most commercial properties, and 10-12 feet for high-security areas.
- Pair height with strong materials like 9-gauge wire and 2-inch mesh to ensure your fence can withstand cutting and climbing.
- Check local zoning laws and permit requirements before installation to avoid fines and ensure compliance with height and setback rules.
How to Choose the Right Security Fence System for Industrial and Commercial Properties
Selecting a security fence system how to choose the right security fence system for industrial and commercial p begins with a clear-eyed look at the property itself. Every site carries its own mix of threats, rules, and physical constraints. A warehouse storing copper wire faces different risks than a retail lot holding parked cars. The right security fence system how to choose the right security fence system for industrial and commercial p must answer those specific risks rather than copy a neighbor's setup.
Risk assessment drives every later decision. Owners who skip this step often overspend on height they do not need or underbuild a fence that fails under pressure. A proper review weighs several criteria at once.
- Access control requirements shape gate configurations, hardware specifications, and integration with security systems.
- Employee safety considerations include emergency egress provisions, visibility requirements, and protection from external threats.
- Insurance compliance often mandates specific security measures that affect fencing specifications and installation requirements.
- Regulatory standards for different industries may impose additional security or safety requirements beyond standard commercial installations.
- Standard commercial heights range from 6 to 12 feet depending on security requirements and local regulations.
- High-security applications may justify taller installations with additional protection features like barbed wire or razor ribbon toppings.
Each criterion pushes the final height up or down. The table below shows how these factors connect.
| Risk Assessment Criterion | Impact on Required Chain Link Fence Height |
|---|---|
| Standard security heights | Commercial and industrial fences typically range 6–12 ft; 8 ft is the industry standard for secure storage |
| Base vs. total height | Mesh fabric height differs from total height once barbed wire or security toppers are added |
| Zoning compliance | Industrial zones often allow higher fences than retail areas; local codes set maximums |
| Deterrence factors | Minimum 6 ft baseline; 8 ft plus barbed wire is industry standard for secure storage |
| Structural integrity | Taller fences require larger post diameters and deeper concrete footings to withstand wind loads |
| Visual screening | Privacy slats increase security by obscuring inventory but require stronger posts due to increased wind resistance |
| Slope management | Racked or stepped installation is necessary on uneven terrain to prevent gaps at the bottom |
| Insurance requirements | Many insurance carriers mandate specific height minimums for coverage on outdoor storage lots |
Chain Link Fences: Matching Height to Risk Level
Height should track directly to risk. A low-risk site such as a suburban office park rarely needs more than 6 feet of fencing. A distribution center holding electronics or pharmaceuticals sits in a different category. Security professionals treat 8 feet as the commercial benchmark for secure storage. High-risk zones, including industrial facilities and government buildings, often call for 10 feet with anti-climb topping. Sites storing high-value items follow the same pattern.
The table below summarizes common recommendations.
| Context | Recommended Height |
|---|---|
| Standard commercial property (most zoning codes) | 6–8 feet |
| Commercial property with increased security needs | 8 feet |
| High-risk zones, including industrial facilities and government buildings | 10 feet with anti-climb topping |
| Industrial/storage sites with high-value items | 10 feet with anti-climb topping |
| Highest physical security chain-link option | Heavy-gauge chain link with razor wire topping at 8–10 feet |
A second view of the same guidance reinforces the pattern.
| Context | Recommended Height |
|---|---|
| Commercial operation or security chain-link fencing | 8 feet or more |
| Commercial applications or high-risk environments | 8 feet |
| Maximum protection or high-security areas | Eight feet or more |
Basic chain link fences at 6 feet stop casual trespassers. They do not stop determined intruders. A basic chain link setup at 8 feet with a topper raises the effort required to breach the perimeter. Owners should match the height to the value of what sits inside the fence, not to the lowest price available.
Chain-Link Fencing Specs That Affect Strength
Height means nothing without matching structural specs. A tall fence built from light materials will lean, sag, or fail in a storm. Wire gauge, mesh size, and post dimensions must scale with height. Chain-link fencing for commercial and industrial applications typically uses 9 gauge wire with 2 inch mesh. Industrial users often choose 6 or 9 gauge with 2 inch mesh for heavier duty. Mini mesh fabric, in sizes as small as 1/4 inch, serves high-security or specialized containment applications.
Mesh size and wire gauge pair together in predictable ways.
| Mesh size | Associated wire gauge in mesh table |
|---|---|
| 3/8 inch | 11 gauge |
| 1/2 inch | 9 gauge |
| 5/8 inch | No explicit pair |
Smaller mesh openings make climbing and cutting harder. Thicker wire resists cutting tools. The two features work together. A chain link fence with 1/2 inch mesh and 9 gauge wire offers far more resistance than a standard 2 inch mesh fence with lighter wire. Buyers should treat these specs as a package rather than shopping for height alone.
Line of Sight and the Link Between Height and Security
Height changes what people can see. A 6 foot fence blocks most ground-level views. An 8 foot fence blocks nearly all of them. This trade-off matters for two reasons. First, guards and cameras lose sight of the perimeter's far side. Second, intruders gain cover for their approach. A taller fence can hide activity that a shorter fence would expose.
The link between height and security runs both directions. More height adds deterrence and delay. More height also reduces natural surveillance. Designers balance these effects by adding cameras, lighting, or clear zones along the fence line. A perimeter protection solution that ignores sight lines often creates blind spots intruders can exploit.
Owners should also consider how height interacts with neighboring properties. A tall fence may block views that local rules protect. It may also create shadows or wind tunnels. These effects rarely appear in fence catalogs. They show up in real disputes and code enforcement visits.
For most commercial and industrial applications, the practical answer combines moderate height with strong specs and good visibility management. A security fence system how to choose the right security fence system for industrial and commercial p should treat height as one variable among many. Chain link fences at 8 feet with 9 gauge wire, tight mesh, and proper bracing outperform taller fences built from weak materials. Chain-link fencing that follows this logic delivers reliable perimeter fencing solutions for years. A security fence system how to choose the right security fence system for industrial and commercial p that respects risk, structure, and sight lines will serve the property far better than one chosen by height alone.
Zoning and Permit Limits for Tall Fences
Local codes govern how tall a fence can stand and where it can sit. Owners who ignore these rules risk fines, forced removal, or denied permits. Municipalities set different limits for commercial, industrial, and residential zones.
Municipal Height Limits
Most U.S. municipalities require a fence permit when installation exceeds 6 ft. Commercial-grade chain link fences typically stand between 6 ft and 8 ft. Common height rules include:
- Fences up to 8 ft high generally need no permit if they lack masonry or concrete elements over 6 ft.
- Neighborhood residential and multifamily zones limit fence height to 6 ft, with an extra 2 ft for architectural features.
- Front or street side setbacks limit fence height to 4 ft.
- Commercial zones may allow up to three strands of barbed wire at a minimum height of 6 ft.
Barbed wire may not slant more than 60 degrees from vertical. It also may not project over public property. No barbed wire is allowed in front setbacks.
Setbacks and Property Lines
Placing fences 2–8 inches away from the property line is a common practice. This distance helps prevent neighbor disputes and allows maintenance on both sides. In commercial and industrial zoning districts, some jurisdictions impose no setback or height restrictions. Administrative Design Review may still apply to perimeter fences on commercial properties, which can affect final placement.
Permit Application Basics
Owners should check local zoning codes before installation. They must submit site plans, fence specifications, and property surveys with the permit application. Approval times vary by jurisdiction. Early compliance saves money and avoids costly revisions.
Barbed Wire and Toppers: Adding Secure Height
How Much Height Toppers Add
Barbed wire remains the standard topper for commercial chain link fences. For an 8-foot installation, the common configuration uses three strands of barbed wire on arms welded to the posts and angled outward at 45 degrees. The same setup applies to most commercial perimeter fences from 6 to 10 feet.
A standard steel barbed wire arm adds 12 inches (1 foot) of additional height to a chain link fence.
That extra foot matters. An 8-foot fence with barbed or razor wire extensions reaches 9 feet total, which may exceed local height limits. Property owners must factor this into permit calculations.
Compliance and Safety Rules
Local zoning ordinances often restrict barbed wire in certain zones. Many municipalities prohibit barbed wire below 8 feet above grade to prevent pedestrian contact. OSHA safety guidelines also apply during installation, including standards at 29 CFR 1910.141 and 29 CFR 1926 Subpart G.
| Factor | Typical municipal rule |
|---|---|
| Permits | Commercial zones require a fence permit; agricultural zones often allow barbed wire without one. |
| Height | Barbed wire is often prohibited below 8 feet above grade. |
| Setbacks | Roads and schools can trigger extra liability insurance. |
| Licensing | Some states require a licensed contractor for projects above $500. |
Alternatives to Barbed Wire
Manufacturers offer anti-climb paint, rotating roller barriers, and natural thorny plants as non-barbed options. These additions work well on enhanced chain link fences. Property managers in high-security environments often choose roller barriers for schools where spikes are banned. These options also strengthen perimeter security while keeping installations compliant. Fence companies can install them on basic chain link installations without adding hazard.
Commercial Chain-Link Fencing Standards
Commercial chain-link fencing must satisfy a complex web of structural, material, and safety requirements. Property owners treating fences as simple barriers often miss critical specifications that determine lifespan and performance. The Chain Link Fence Manufacturers Institute (CLFMI) publishes the industry-recognized references that consolidate all applicable ASTM and federal standards. The CLFMI Product Manual (CLF-PM0610) and the Guide for Specifying Commercial, Industrial, and Security Chain Link Fence and Gates (Contract Section 32 31 13) serve as the authoritative resources for commercial installations.
Structural Load and Wind Ratings
Every commercial fence must resist two persistent forces. These forces include the weight of its own components and the pressure of wind pushing against the fabric. Designers calculate structural load based on the surface area of the chain-link fabric, the height of the installation, and local wind speeds. The American Society of Civil Engineers publication ASCE 7-22 provides supplemental wind-loading design criteria that many specifiers incorporate into their calculations.
The table below lists the ASTM, federal, and related design specifications that apply to commercial chain-link fencing systems.
| Standard/Specification | Application |
|---|---|
| ASTM A392 | Zinc-coated steel fabric |
| ASTM A491 | Aluminum-coated steel fabric |
| ASTM F668 | PVC-coated fabric |
| ASTM F1043 | Strength requirements for steel framework |
| ASTM F567 | Installation practice |
| ASTM F626 | Hardware specifications |
| ASTM A121 | Barbed wire |
| UFGS 32 31 13 | Federal Unified Facilities Guide Specification for fencing |
| RR-F-191/3 | GSA federal fencing standard |
| ASCE 7-22 | Supplemental wind-loading design criterion |
These astm material and performance standards establish a baseline for every component in the system. Chain-link fencing components must meet each standard before installation professionals can consider the assembly compliant.
Wind ratings matter more for tall fences than for short ones. An 8-foot fence presents nearly double the surface area of a 4-foot fence. Strong gusts push against this surface with enormous force. The posts, rails, and concrete footings must transfer that force safely into the ground. A fence with inadequate structural capacity will lean, buckle, or collapse during a severe storm. Property owners rarely notice the problem until the damage appears.
For slightly higher protection needs, enhanced chain link fences can be installed. These may include additional features such as barbed wire or razor wire on top, increased height (up to 10 feet or more), and thicker gauge wire. A commercial property, such as a warehouse or distribution center, might employ an 8-foot high chain link fence with three strands of barbed wire at the top.
The block quote above describes the typical enhanced commercial installation. The industrial sector follows a stricter set of minimums, as shown below.
| Specification | Industrial / Enhanced Minimum |
|---|---|
| Wire gauge | 6 gauge or heavier |
| Mesh opening size | 1" or 1.75" (anti-climb) |
| Fence height | 8 ft – 12 ft |
| Line post diameter | 2-1/2" or larger |
| Terminal post diameter | 4" or larger |
| Post schedule | Schedule 40 or heavy-wall |
| Coating | Galvanized |
Lower gauge numbers indicate thicker wire. 6-gauge serves as the baseline for industrial sites, while 9-gauge works for general commercial applications. Reducing mesh openings to 1.75" or 1" makes the fence significantly harder to climb. The structural load increases with the heavier fabric, so post specifications must scale accordingly.
Post Spacing and Gauge Requirements
Post spacing ranks among the most important structural decisions in any fence installation. Standard practice for commercial fences places line posts 8 feet apart on center. Closer spacing produces a sturdier fence that resists sagging and movement. Wider spacing lowers material costs but allows the fence to flex under load. Most permanent installations benefit from the 8-foot standard because it balances strength with economy.
For high-risk areas or fences over 6 feet tall, specifiers upgrade to 2-1/2-inch O.D. terminals and 2-inch O.D. line posts to handle the increased wind load and weight.
The table below translates those requirements into practical specifications.
| Fence Height | Line Post Spacing (OC) | Line Post Diameter | Terminal Post Diameter | Terminal Post Wall Thickness |
|---|---|---|---|---|
| 8 ft (Commercial) | 8 ft | 2-1/2" | 3" | .095" (Sch 40) |
Wire gauge and mesh size work together with post spacing to determine the overall strength of the system. The chain-link fabric forms the visible barrier, but the framework carries the real load. Commercial specifiers select 9-gauge galvanized steel wire as the general baseline. Industrial sites often upgrade to 6-gauge wire for additional cut resistance and durability. Galvanized or polymer-coated carbon steel provides the corrosion protection that extends fence life in harsh environments.
The steel wire mesh itself must also match the performance standard for the site. Anti-climb mesh sizes such as 1" or 1.75" prevent footholds and make unauthorized entry difficult. Fabric tensioning and installation methods follow ASTM F567, which governs the entire installation practice. Proper tension prevents sagging and keeps the wire strands aligned. Installation crews must anchor the fabric securely at every terminal post and stretch it evenly along the line posts.
Gates and Access Points
Gates represent the weakest point in any perimeter fence. A fence that rises 8 feet above the ground means nothing if a gate lacks matching protection features. Commercial property owners must balance convenient authorized access with robust detection and delay capabilities. The table below summarizes the standards that apply to commercial gate systems.
| Security Standard Category | Requirement / Best Practice |
|---|---|
| Code compliance | Commercial fence and gate installations must satisfy zoning requirements, safety standards, and OSHA compliance guidelines to pass inspections and support safe use on business and public-facing properties. |
| Perimeter design | Fence systems should be configured with appropriate height selection, gate placement, and integration with controlled entry points to deter unauthorized access while maintaining visibility. |
| Gate types | Sliding, swing, and cantilever gates are selected based on available space, traffic flow, and frequency of use to provide controlled vehicle and pedestrian access with structural stability. |
| Automation | Commercial automatic gate operators pair with access controls to regulate traffic flow and strengthen protection at primary and secondary access points. |
| Access control integration | Coordinated gate systems and access controls direct pedestrian and vehicle movement, improve organization, and reduce risk across the property. |
Gates must match the anti-climb and anti-cut characteristics of the heavy-duty fabric. High-tensile strength wire often reaches 75,000 psi or higher. Specialized coatings provide significant breach delay, creating a window for detection and response. The gates also serve as a platform for surveillance integration. Cameras can view the gate area without blind spots when designers position them correctly.
Property owners can equip gates with vibration sensors or magnetic contacts to alert personnel to unauthorized movement. Access control upgrades include card readers, biometric scanners, and remote monitoring software operated through automated slide or heavy-duty cantilever systems. Gates should follow uneven terrain grade to eliminate bottom gaps and prevent tunneling or crawling.
Designing an effective gate system follows a logical sequence. The ordered list below outlines the steps.
- Customize the system to the property's protection requirements by selecting appropriate fence heights, wire gauges, post configurations, and gate styles.
- Apply higher fencing for additional deterrence where valuable equipment or inventory is present, and incorporate privacy screening where visibility should be limited.
- Use barbed wire or other approved enhancements only where local regulations and property requirements permit.
- Design access gates to accommodate employees, delivery vehicles, emergency personnel, and restricted entry points.
- Direct employees, customers, contractors, and delivery vehicles toward designated access areas through coordinated gate configurations.
- Incorporate automated gates when more controlled access is required, and have personnel monitor designated entrances while the rest of the perimeter remains fenced.
- Establish clearly defined entry points and consistent access procedures to reduce confusion and support both physical protection and smoother operations.
Wind Load and Visual Screening
Privacy Slats and Mesh Options
Privacy slats block sight lines, and they change how a fence handles wind. PVC slats suit budget projects and mild climates. Polyethylene slats resist UV damage and fit commercial properties in harsh sunlight. Aluminum slats deliver premium strength for industrial sites. Winged and specialized slats offer the greatest coverage, and high-density slats cost more than standard vertical options.
| Material | Key Properties | Best Suited For |
|---|---|---|
| PVC | Affordable, lightweight, moisture-resistant | Residential fences, budget projects, mild-to-moderate climates |
| Polyethylene | Flexible, durable, often UV-resistant, weather-resistant | Commercial properties, harsh sunlight, long-term outdoor use |
| Aluminum | Premium, excellent durability and strength | High-end commercial sites, industrial applications, long-term durability |
Wind Impact on Tall Chain Link Fences
Slats impede airflow and turn an open fence into a wind-catching surface. This sail effect increases pressure on the chain-link fabric and its framework. Wind pressure scales with the square of wind speed, so doubling wind speed roughly quadruples the pressure. Rigid slats reduce airflow more than open mesh, which raises load sensitivity on older posts. Industry wind loading design criteria warn that fences with windscreens or slats may need a strength analysis for post size and spacing.
"Yes. Privacy slats increase the wind load on a chain link fence, since they impede air flow... A recommended approach is to use heavier-gauge steel and larger concrete footings if you know you will be adding privacy slats to your fence. If you are retrofitting slats to an older fence, a professional inspection can help ensure the fence can handle the added wind load."
Height compounds the problem. Under ASCE 7, the velocity pressure exposure coefficient rises with height, and taller perimeter fences carry longer moment arms at the post base. A jump from 4 feet to 8 feet can nearly quadruple the structural demand at the base.
When Screening Weakens Security
Screening creates a trade-off. Solid slats hide inventory from passersby, yet they also hide intruders from guards and cameras. This loss of visibility undermines security and surveillance along the fence line. High-opacity screens and rigid slats generate more wind force than breathable mesh, and they can bend posts on fences not built for the added load. Owners should weigh concealment against sight lines and structural capacity before adding screening to any chain-link fabric.
Securing Sloped Perimeters
Sloped ground complicates every fence installation. Posts must stay plumb, fabric must stay taut, and the bottom edge must follow the terrain without leaving gaps. Installers choose between two main approaches, and each one suits different grades.
Raked Versus Stepped Installation
Racked installation lets the fabric follow the natural slope in one continuous line. Stepped installation sets the fence in horizontal sections that drop from one post to the next. The table below compares the two methods.
| Installation Method | Description | Best Suited For | Security Consideration |
|---|---|---|---|
| Stepping | Fence installed in horizontal sections that step down the slope | Steep inclines where consistent fence height is essential | Precise mesh measurements required to avoid gaps that could compromise security |
| Racking | Fence follows the natural slope without noticeable steps | Gradual inclines; smoother appearance desired | Mesh must handle constant tension from uneven ground |
Crews mark the boundary with stakes and string before digging. For stepped fences, they start at the lowest point and work upward. For racked fences, they set posts at regular intervals and adjust heights along the slope.
Height Consistency on Grades
A fence that drops with the terrain leaves a climbable gap at the bottom. Installers keep the top edge level and extend the fabric downward on the low side. This practice maintains a consistent barrier height across the entire run. Security depends on this consistency, especially for perimeter fences on commercial sites.
Drainage and Ground Gaps
Water pools at the base of any fence on a slope. Poor drainage erodes soil and opens gaps under the fabric. Installers add gravel or concrete at each post to stabilize the base. They also leave a small clearance between the fabric and the ground to prevent rust. Professional installation matters on challenging terrain, because poor anchoring creates structural weaknesses and inconsistent height.
Raising an Existing Chain Link Fence
Property owners often need more height from an existing fence. Raising a chain link fence costs less than a full replacement in many cases. The right approach depends on the current structure and the target height.
Height Extension Options
Several methods can add height to an existing fence. Each option serves a different goal.
| Method | Primary Goal | Cost | DIY Difficulty | Appearance |
|---|---|---|---|---|
| Metal Post Extenders | Height & Security | Moderate | Medium | Seamless, Professional |
| Privacy Fabric/Screen | Instant Privacy | Low | Easy | Functional, Clean |
| Welded Wire Mesh | Pet Containment | Low | Easy | Basic |
| Extend-an-Arm Brackets | High Security | Moderate | Medium | Industrial |
| Wooden Planks/Slats | Looks & Privacy | High | Hard | Stylish |
| Taller Replacement Posts | Maximum Stability | Moderate | Hard | Original Look |
Common extension approaches include:
- Using PVC or new line posts to extend fence posts (cost-effective, weather-resistant, can support attachments)
- Adding fabric to the top of the fence (instant privacy, wide range of colors/patterns, removable)
- Adding welded wire to the top of the fence (high deterrent value, can match existing fence, supports vines)
- Following a step-by-step guide for extending a 4-foot fence to 6 feet (assess and measure, select materials, dismantle old fencing)
Structural Assessment First
A taller fence carries more wind load. The existing posts, rails, and footings must handle the added stress. A professional inspection reveals whether the current framework can support the extension. Enhanced chain link fences often require larger posts and deeper concrete footings. Skipping this step risks collapse during high winds.
Cost Versus Replacement
Extension typically costs less than a new installation. However, older chain-link fencing with rust or bent posts may not justify the investment. Replacement delivers better long-term value when the existing structure shows significant wear. Owners should compare material costs, labor, and expected lifespan before deciding.
Maintenance, Inspections, and Liability
Neglect turns a fence into a liability magnet. Property owners who skip maintenance invite theft, injuries, and lawsuits.
Inspection Schedules
Commercial properties benefit from quarterly inspections. A thorough review covers:
- Fence posts: straight, immovable, free from damage
- Fence panels: rails straight; fabric secure with no sagging
- Fence hardware: post caps, tie wires, clamps, and rail ends secure
- Fence coatings: rust treated; protective coatings reapplied to preserve corrosion resistance
- Fence gates: smooth operation, proper latching, cleaned components
- Extra features: privacy slats or barbed wire checked for breakage
- Drainage: pooling water addressed to prevent foundation erosion
This routine catches small problems before they become expensive failures.
Documentation and Compliance Records
Municipalities and insurers expect compliance documentation. Property owners should assemble:
| Documentation | Role in proving compliance |
|---|---|
| Property survey | Confirms fence location relative to property lines |
| Design plans | Show the fence meets municipal code specifications |
| Approved permit | Official proof of local authority review |
| Permit copies and correspondence | Record of inspections and approvals |
The approved permit package acts as protective proof for future disputes.
Reducing Liability Exposure
A failing fence creates legal exposure. One Chicago warehouse saw a 30% rise in break-ins after failing to repair its perimeter fence. A storage facility's chain-link fence collapsed in a windstorm and injured a bystander; the court found the business negligent. A retail store's own fence blocked a sidewalk, and a pedestrian tripped on an exposed anchor. Approximately 60% of burglars target businesses with poor perimeter security.
If a barrier is falling apart, it is not just a security risk—it is a legal liability. If it is on your property, you are responsible for its upkeep.
Regular inspections, solid documentation, and prompt repairs reduce this exposure.
An 8-foot chain link fence with barbed wire remains the commercial security benchmark. A 6-foot chain-link fencing suits low-risk sites, while 10–12 feet serves high-security needs. Effective security combines correct height with proper specs, toppers, and code compliance. Owners treat fence height as a business decision. They match chain-link height to risk, budget, and legal limits. Basic chain link fences protect many properties. Taller chain link fences deter determined intruders. A chain link fence works best with strong chain-link materials. Perimeter fences demand careful planning. Chain-link systems deliver lasting value.
FAQ
What fence height should a commercial property use?
Most commercial sites require an 8-foot chain link fence. Low-risk properties may use 6 feet. High-security areas need 10–12 feet with anti-climb features.
Do privacy slats strengthen perimeter security?
Privacy slats block sight lines but weaken security by hiding intruders. They also increase wind load. Owners must reinforce posts when installing slats on tall fences.
Can a property owner raise an existing chain link fence?
Yes. Post extenders or added fabric raise height. Inspect existing posts first for structural soundness. Replacement often makes sense for rusted or bent frameworks.
Contact Us
E-mail :
Phone/WhatsApp/WeChat:
Address:
No. 12, Jing Si Road, East Industrial Park, Anping County, Hengshui City, Hebei Province